The Starline Can-Bus alarm system with immobiliser, two TAGs, 4G modem, including installation in the Mercedes-Benz Marco Polo
Item no. 35899
- Your key alone isn't enough: The immobiliser requires additional authorisation.
- Stay informed while away: Receive alerts via calls and push notifications.
- Multiple layers of protection: Sensors detect impacts, tilting and movement.
- Easy authorisation: Use your smartphone or either of two included Bluetooth TAGs.
The StarLine 4G alarm system adds vehicle monitoring and a separate start authorisation to your Mercedes-Benz Marco Polo. It combines a CAN bus alarm, digital iCAN immobiliser, 4G modem and two Bluetooth tags, allowing you to receive alarm notifications by phone call and push message as well as at the vehicle.
Monitor doors, movement and changes in vehicle angle
The system monitors door contacts and battery voltage through the CAN bus. Its integrated 3D sensor detects movement, tilt and impacts. Two-stage impact detection with pre-alarm and alarm distinguishes between two trigger levels. The equipment includes a waterproof single-tone siren with a stated sound level of 126 dB. An event history records sensor events and retrieved CAN bus data so you can review what happened.
Require separate authorisation, not just the vehicle key
The digital iCAN immobiliser blocks engine starting without valid authorisation, even if a vehicle key is present. Authorisation is provided by a Bluetooth tag, a smartphone authorised via Bluetooth or a PIN entered using vehicle buttons. Two waterproof STAR-TAG-1 transponders are included. The alarm can be armed with the original vehicle remote key. Keyless Entry protection, Super Slave mode and hands-free operation provide additional operating options.
Receive alerts and check vehicle status remotely
The system supports phone calls and push notifications when an alarm is triggered. You can control and configure the alarm and immobiliser through the German-language iOS/Android app or the browser interface on a tablet, laptop or desktop computer. The status display shows whether the system is armed or disarmed. Depending on the vehicle, information about the vehicle battery, interior temperature, fuel level and odometer reading may also be available.
The integrated 4G modem has a Nano-SIM card reader. A separate Nano-SIM card is required for operation. Remote access and mobile alarm notifications require a mobile network connection.
Bring everyday controls together in the app and browser
You can arm and disarm the system using your smartphone. Voice commands through the Android app or Siri on an iPhone, together with iPhone widgets, provide further ways to operate it. Freely assignable buttons and individual colour settings let you personalise the app and browser interface.
- Central locking: Depending on the vehicle, you can define automatic actions, such as locking when the ignition is switched on or unlocking when the handbrake is applied.
- Heating and external devices: Supported connections can be switched on and off through the app and browser. Webasto and Eberspächer control are listed in the equipment specification.
- Tailgate and vehicle finder: Supported tailgate opening can be controlled remotely. A single alarm tone helps you find the vehicle.
- Diagnostics: CAN/OBD2 diagnostics display readable vehicle fault messages in the app.
Plan for workshop fitting and check your vehicle version
The system is offered exclusively with installation at the 1sternehotel workshop, not as a self-installation kit. Compatibility and CAN bus functionality must be checked for the specific vehicle. Support for your particular Mercedes-Benz Marco Polo W447 or Viano Marco Polo W639 version must be established before installation. Vehicle-dependent features include integration of an existing factory alarm and original sensors, available vehicle data, central locking and tailgate opening.
GPS tracking requires the optional STAR-GPS extension and is not part of the listed standard equipment. Other additions, including a Bluetooth relay, extra transponders, a touch sensor and a programming interface, are listed separately below.
EQUIPMENT
- CAN bus alarm system, armed using the vehicle remote key
- 4G modem with Nano-SIM card reader
- CAN bus immobiliser (iCAN), digital engine blocking
- 2x STAR-TAG-1 Bluetooth transponders, waterproof
- Bluetooth Smart authorisation via smartphone
- PIN code authorisation using vehicle buttons
- Integrated 3D shock, tilt and motion sensor
- Integrated 2CAN + 2LIN data bus interface
- Keyless Entry protection
- Super Slave mode
- Central locking control via CAN bus
- Hands-free mode (Keyless Entry)
- OBD2 diagnostics
- Integrated temperature sensor
- Webasto & Eberspächer control
- Service button with integrated status LED
- Single-tone siren rated at 126 dB, waterproof
- Micro-USB input for software updates and settings
- Apple iOS and Android smartphone app in German
OPTIONAL ACCESSORIES
- StarLine STAR-R6 waterproof Bluetooth relay
- StarLine STAR-TAG-1 Bluetooth transponder
- StarLine STAR-EC capacitive touch sensor
- StarLine STAR-GPS tracking system extension
- StarLine STAR-BLE Bluetooth programming interface
IMPORTANT NOTE
An optional Nano-SIM card is required for operation. We recommend our TELE2 IoT SIM card including 50 MB, 10 SMS, 10 minutes, roaming (EU+3), 12/36 months prepaid.
TECHNICAL DATA
- Operating temperature: -40°C to +85°C
- SIM card format: NANO-SIM (4FF), 12.3 x 8.8 mm
- Bluetooth receiver for wireless connection of transponders, relays, programming interface and smartphones.
What is included with the StarLine 4G alarm system?
The equipment includes the CAN bus alarm, digital iCAN immobiliser, a 4G modem with Nano-SIM card reader, two waterproof STAR-TAG-1 Bluetooth transponders, an integrated 3D sensor and a waterproof 126 dB siren. Workshop installation is included in the offer.
Which Marco Polo models does the system support?
Installation is offered for the Mercedes-Benz Marco Polo. Support for your specific W447 or Viano Marco Polo W639 version must be checked before fitting. Compatibility with every version is not stated. The available CAN bus functions also depend on the vehicle.
How does the additional immobiliser work?
The digital iCAN immobiliser blocks engine starting without valid authorisation. Authorisation is provided by a Bluetooth tag, a smartphone authorised via Bluetooth or a PIN entered using vehicle buttons. The vehicle key alone does not replace this separate authorisation.
Which events and vehicle areas are monitored?
The system monitors door contacts and battery voltage through the CAN bus. Its integrated 3D sensor detects movement, tilt and impacts. Impact detection has two stages for pre-alarm and alarm. Sensor events and retrieved CAN bus data are recorded in the event history.
How are you notified when an alarm is triggered?
The system supports alarm alerts by phone call and push notification. Control and status information are available through the German-language iOS/Android app or a browser on a tablet, laptop or desktop computer. Mobile alerts and remote access require a mobile network connection.
Which SIM card is required?
Operation requires a separate Nano-SIM card in the 4FF format. It is listed as an optional accessory, not as part of the listed standard equipment. The product information recommends a TELE2 IoT SIM card. The 4G modem and card reader are integrated.
How is the system operated, and which convenience functions are provided?
The system can be armed with the original remote key and armed or disarmed using a smartphone. Further controls include voice commands, Siri, iPhone widgets and freely assignable buttons. Automatic central locking and tailgate opening depend on the vehicle. Supported heaters and external devices can be controlled through the app and browser. A single alarm tone serves as a vehicle finder.
Which vehicle data and diagnostic information can be displayed?
The app displays the armed or disarmed status and an event history. Depending on the vehicle, battery information, interior temperature, fuel level, odometer reading and readable fault messages through CAN/OBD2 diagnostics may be available. Integration of an existing factory alarm and original sensors also depends on the vehicle.
Is GPS tracking included?
GPS tracking is not part of the listed standard equipment. The StarLine STAR-GPS tracking system extension is listed as an optional accessory for this purpose. The integrated 4G modem alone does not provide GPS tracking.
Where is the system fitted, and can you install it yourself?
The alarm system is offered exclusively with installation at the 1sternehotel workshop. This offer is not a self-installation kit. Support for the specific vehicle and the intended connections must be checked before fitting.
| Brand | StarLine |
| Item No. | 35899 |
| Content | 1 Installation |
| Condition | New |
| Weight | 1000 g |
| Customs tariff number | 85311095 |
| Manufacturer | ScPA StarLine Ltd Komissara Smirnova Street 9 194044 Saint Petersburg Russia export@starline.ru |
| EU Responsible Person | Ampire Electronics GmbH & Co.KG Langwadener Straße 60 41516 Grevenbroich Germany support@ampire.de |
