Awning for Mercedes-Benz Marco Polo / Horizon / Activity and Viano Marco Polo incl. Fiamma F35 Pro, rainproof connection, bracket and installation
Item no. 36495
- Shade and rain cover: Waterproof fabric and rainproof connection to your vehicle.
- No extra height: The awning stays below your vehicle's highest point.
- No crank needed: Simply unroll; support legs and tension arms are integrated.
- Room for accessories: Vehicle rail stays free, plus two extra awning rails.
This awning system combines the Fiamma F35 with vehicle-specific brackets and a rainproof connection to the vehicle. It creates a covered space beside your Mercedes-Benz Marco Polo for breaks in sunshine or rain, without leaving an open rain gap between the awning and the van.
Matched to your Marco Polo and its pop-top roof
The mounting system is designed for the Mercedes-Benz Marco Polo, Horizon and Activity W447 from 2014 onwards with a manual or electric easy up pop-top roof. It also fits the Viano Marco Polo W639 from 2004 to 2014, exclusively with a manual pop-top roof. Installation is on the passenger side. Driver-side installation is not possible on Horizon and Activity models.
No drilling and no increase in vehicle height
The 3 mm thick, galvanised and powder-coated brackets attach to existing original fixing points. Installation requires no drilling or adhesive on the vehicle. The mounting system is designed for use with the glass-fibre-reinforced plastic pop-top roof either raised or closed.
The closed housing sits close to the vehicle without projecting out to the side. This positioning is designed to minimise wind noise and blend into the vehicle's shape. Depending on the vehicle and roof version, the awning sits approximately 2 to 3 cm below the vehicle's maximum height and does not increase it. Always use your vehicle's actual height when assessing restricted entrances. Automatic car washes may be used only if the operator permits entry with the awning fitted.
Rain protection right up to the vehicle
A rubber lip seals the connection between the awning and the vehicle against rain. This also allows the rear tilt-out window to remain open in light rain. The waterproof, UV-resistant multilayer vinyl fabric provides sun and rain protection over approximately 202 x 225 cm. It is printed on both sides and comes in grey and black, with the colour name Royal Grey.
Operate it by hand, without carrying a crank
The 233 cm aluminium housing in matt Deep Black protects the compactly stowed awning. The stated weight is approximately 16 kg. Support legs and tension arms are stored inside the reinforced roller. Operation is manual, with no crank required. The fabric can be rolled up either inwards or outwards, making it easier to pack away.
Keep your awning rail accessible and remove the complete system when needed
The original Westfalia awning rail on the vehicle remains unobstructed for other Marco Polo accessories. The awning roller also incorporates two additional awning rails for front panels or accessories.
When required, you can remove the awning and its brackets completely in a few minutes. Depending on the version, this involves undoing three or four M6 hex-head screws made from V4A stainless steel, using a 10 mm open-ended spanner or a ratchet with a suitable 10 mm socket. Once the system is fully removed, no brackets remain on the vehicle.
Fitting and a practical demonstration at 1sternehotel
Fitting at 1sternehotel's premises, including a demonstration of how to use the awning, is included in the package. Allow approximately one hour. Your vehicle model and pop-top roof version determine the appropriate vehicle-specific mounting system.
Included in the package
- Lightweight Fiamma F35 awning, 233cm long. Housing in matt black (Deep Black), with grey / black fabric (Royal Grey).
- Vehicle-specific powder-coated awning mounting system for Mercedes-Benz Marco Polo (manual roof / electric roof) Viano Marco Polo (with manual roof)
- Pegs for ground anchoring
- Pegs and guy rope for lateral guying
- Fitting at our premises is included in the package
- Fitting time including a demonstration: approximately one hour
Handling instructions
- The awning should ALWAYS be secured with pegs and additionally guyed IMMEDIATELY after setting it up
- Before driving, check that the awning is firmly secured and the housing is correctly closed
- Check all screws regularly, approximately every three months, to ensure they are tight
Technical specifications
- Housing: length: 233cm x teardrop-shaped cross-section: 9.5 x 8cm
- Sun and rain protection fabric: approx. 202cm x 225cm
- Weight: approx. 16kg
Compatibility
Our awning system is compatible exclusively with the vehicles listed
- Mercedes-Benz Viano Marco Polo 2004 - 2014 with manual pop-top roof
- Mercedes-Benz V-Class Marco Polo 2014 - present with manual pop-top roof
- Mercedes-Benz V-Class Marco Polo 2014 - present with easy up pop-top roof
Which vehicles and pop-top roofs is the awning compatible with?
The system fits Mercedes-Benz Marco Polo, Horizon and Activity W447 from 2014 onwards with a manual or electric easy up pop-top roof. For the Viano Marco Polo W639 from 2004 to 2014, only the version with a manual pop-top roof is compatible.
Where and how is the awning fitted?
The vehicle-specific brackets attach to existing original fixing points on the passenger side. No drilling or adhesive is required on the vehicle. Driver-side installation is not possible on Horizon and Activity models. The mounting system is designed for use with the glass-fibre-reinforced plastic pop-top roof raised or closed.
What are the awning's dimensions, colours and weight?
The aluminium housing is 233 cm long and has a teardrop-shaped cross-section measuring 9.5 x 8 cm. Its finish is matt Deep Black. The fabric measures approximately 202 x 225 cm and comes in grey and black under the colour name Royal Grey. The stated weight is approximately 16 kg.
How is the connection to the vehicle sealed against rain?
A rubber lip seals the connection between the awning and the vehicle against rain. The multilayer vinyl fabric is waterproof, UV-resistant and printed on both sides. The rainproof connection also allows the rear tilt-out window to remain open in light rain.
How do you operate and secure the awning?
The Fiamma F35 is operated manually without a crank. Support legs and tension arms are integrated into the roller, and the fabric can be rolled up inwards or outwards. Always peg down and guy the awning immediately after setting it up. Before every journey, check that it is firmly secured and the housing is correctly closed. Check all screws for tightness approximately every three months.
How can the awning and its brackets be removed?
Depending on the version, undo three or four M6 hex-head screws made from V4A stainless steel. A 10 mm open-ended spanner or a ratchet with a suitable 10 mm socket is sufficient. Complete removal takes a few minutes and leaves no brackets on the vehicle.
How does the awning affect vehicle height and automatic car wash use?
The awning does not increase vehicle height. Depending on the vehicle and roof version, it sits approximately 2 to 3 cm below the vehicle's maximum height. Check your vehicle's actual height before using height-restricted entrances. An automatic car wash may only be used if its operator permits entry with the awning fitted.
Which awning rails remain usable?
The original Westfalia awning rail on the vehicle remains unobstructed. The awning roller also has two integrated awning rails for inserting front panels or accessories.
What is included, and how long does fitting take?
The package includes the Fiamma F35, the vehicle-specific powder-coated mounting system, the rainproof connection, pegs for ground anchoring, and pegs and guy rope for lateral guying. Fitting at 1sternehotel's premises, including a practical demonstration, is also included and takes approximately one hour.
| Brand | Fiamma |
| Item No. | 36495 |
| Content | 1 Installation |
| Condition | New |
| Weight | 15500 g |
| Customs tariff number | 63061200 |
| Manufacturer | Fiamma S.p.A Via S. Rocco 56 21010 Cardano al Campo (Va) Italy fiamma@fiamma.it |
