Click & Heat - the auxiliary heater - extension in the pop-up roof for the Mercedes-Benz Marco Polo, Horizon, Activity (W447) or Viano MP W639
Item no. 36453
- Warmth in your roof bed: Directs around 60% of warm air upstairs.
- No extra battery drain: No electrical connection or additional fan noise.
- Click into place: Magnetic attachment, no drilling, removable whenever needed.
- Easy to stow: Packs down to 25 x 18 x 12 cm.
Click & Heat directs warm air from your existing auxiliary heater into the pop-top roof, rather than heating mainly the lower living area. This compact heating hose for the Mercedes-Benz Marco Polo, Horizon and Activity W447 and Viano Marco Polo W639 works without its own fan or an additional electrical connection.
Warm the roof bed while still heating the living area
The inlet duct uses the airflow from the auxiliary heater: approximately 60% of the warm air reaches the pop-top roof, while approximately 40% remains in the living area, flowing beneath the driver's seat. This distributes the existing heated air between both levels without adding fan noise.
The airflow supports circulation towards the upper ventilation slots in the roof bellows. The extension is designed for continuous operation of the auxiliary heater.
Magnetic attachment without drilling
Click & Heat attaches to the rear of the seat base and is held in place by a neodymium magnet. There is no need to drill holes or modify any trim. The upper end of the hose hangs from the supplied hanger on the black bed suspension straps. You can remove the extension again when it is not needed.
Choose the version that matches your vehicle
There are separate versions for the two vehicle series: W447 from model year 2014 onwards or W639 from 2004 to 2014. Select the version for your vehicle. The W639 version includes a black powder-coated adapter plate for magnetic attachment.
An existing auxiliary heater is required. Neither the heater itself nor the original plastic heater cover shown in the product images is included.
Compact storage between trips
With packed dimensions of 25 x 18 x 12 cm and a weight of 550 g, the heating hose takes up little space when not in use. One storage option is a Front Runner storage bag for the rear slide-out tray.
Click & Heat is made in Gersfeld in the Rhön region of Germany. For use in combination with a sleeping-area extension, please refer to the separate product bundle.
Extend fully for use and remove before closing the roof
Only use the heating hose fully extended, and remove it before folding down the pop-top roof. This avoids heat build-up inside a compressed hose and prevents the hose from being crushed when the roof closes. The temperatures mentioned below are an illustrative guide; adjust the heater to suit the actual conditions in your vehicle.
Installing and using the Click & Heat auxiliary heater extension
Pass the supplied hanger and its key ring through the loop in the black bed suspension strap to secure the hanger. The hanger can remain permanently attached to the vehicle. The supplied hanger can also be used for other items, such as car keys.
Once you have reached your chosen pitch, click Click & Heat onto the seat base, hang the upper end of the heating hose from the supplied hanger in the roof sleeping area, and switch on the auxiliary heater.
Important: Remove the auxiliary heater extension hose BEFORE folding down the pop-top roof to avoid damaging or crushing the hose.
Use the heating hose only when extended, otherwise heat may build up inside it.
When using the auxiliary heater extension, remember that the thermostat is located low down in the passenger-side B-pillar. Set the auxiliary heater to approximately 14 degrees; at an outside temperature of 0 degrees, this corresponds to approximately 19 degrees in the roof sleeping area. We recommend taking the auxiliary heater remote control up to the roof bed so that you can switch the heater off if required. On models with MBAC, the auxiliary heater can be controlled by phone as long as you are within Bluetooth range.
You will need to try different settings and make adjustments to achieve your preferred sleeping temperature in the roof bed. For particularly cold and windy days, we also recommend pop-top roof insulation.
Please note
This item only works if your Mercedes-Benz Marco Polo has an auxiliary heater. The auxiliary heater is not included with this item.
Included in delivery
W447 version, model years 2014 to present
1x Click & Heat auxiliary heater extension for the pop-top roof
1x hanger to attach the hose to the black bed suspension straps
W639 version, model years 2004 to 2014
1x Click & Heat auxiliary heater extension for the pop-top roof
1x black powder-coated adapter plate for magnetic attachment
1x hanger to attach the hose to the black bed suspension straps
Please note: The original plastic auxiliary heater cover shown in the images is not included with this item.
What does the Click & Heat auxiliary heater extension do?
Click & Heat directs warm air from an existing auxiliary heater into the pop-top roof. Approximately 60% of the warm air reaches the roof bed, while approximately 40% flows beneath the driver's seat and remains in the lower living area. The airflow supports circulation towards the upper ventilation slots in the roof bellows.
Which vehicles is the heating hose designed for?
There is a version for the Mercedes-Benz Marco Polo, Horizon and Activity W447 from model year 2014 onwards, and a version for the Viano Marco Polo W639 from 2004 to 2014. Choose the version for your vehicle series. An existing auxiliary heater is required and is not included.
How is Click & Heat attached?
The extension attaches to the rear of the seat base and is held in place by a neodymium magnet. The upper end of the hose hangs from the supplied hanger on the black bed suspension straps. No drilling or trim modifications are required. The W639 version also includes a black powder-coated adapter plate for magnetic attachment. The hanger can remain in the vehicle.
What electrical connection does the extension need, and does it add noise?
Click & Heat needs no electrical connection of its own and has no additional fan, so it adds no fan noise. Your existing auxiliary heater continues to operate normally. The extension is designed for continuous operation of that heater.
What are the packed dimensions and weight?
The packed dimensions are 25 cm long, 18 cm wide and 12 cm high. The weight is 550 g. Click & Heat is made in Gersfeld in the Rhön region of Germany.
What must you bear in mind when using the hose?
Only use the heating hose fully extended, as heat can otherwise build up inside it. Always remove it before folding down the pop-top roof to avoid damaging or crushing the hose.
How do you set the temperature for the roof bed?
The thermostat is located low down in the passenger-side B-pillar. As an illustrative guide, the instructions mention a heater setting of approximately 14 °C giving approximately 19 °C in the roof sleeping area at an outside temperature of 0 °C. Adjust the setting to suit actual conditions and your preferred temperature. Take an existing heater remote control up to the roof bed so that you can switch the heater off if needed. Models with MBAC allow phone control within Bluetooth range.
What is included, and what is not?
The W447 version includes one Click & Heat auxiliary heater extension and one hanger for the black bed suspension straps. The W639 version also includes a black powder-coated adapter plate. The auxiliary heater and the original plastic heater cover shown in the images are not included.
The order creation for optional installation service is done manually, in this case please do not order online.
| Brand | 1sternehotel |
| Item No. | 36453 |
| Content | 1 piece |
| Condition | New |
| Weight | 550 g |
| Customs tariff number | 87089997 |
| Manufacturer | Axel Seidel Peter-Seifert Str. 10 36129 Gersfeld Germany hello@1sternehotel.de |









