Zenec ZE-RCE4602EL - ZENEC E>GO Rückfahrkamera MERCEDES B-200

Vehicle-specific rear-view camera from the ZENEC E>GO series. The supplied vehicle fitment information lists the MERCEDES A-Class (W176) from 2012 onward. Note: The product name identifies the MERCEDES B-200, but compatibility with that model is not confirmed by the information provided.

The compact wide-angle camera replaces the factory-installed license plate light module. To install it, remove the license plate light, fit the camera and route the cable to the control unit. The separable three-part system cable is 5.0 m long and has waterproof system connectors to simplify cable routing. The camera integrates discreetly into the vehicle while retaining its original appearance. It uses the same type of bulb as the target vehicle for license plate illumination: an incandescent bulb or LEDs, depending on the vehicle model.

The CMOS sensor provides high color fidelity and, thanks to its light sensitivity, captures areas in low-light conditions. The horizontal viewing angle is 110°. Guide lines integrated into the camera image assist with parking and maneuvering. The camera housing is certified to IP69K and protected against contact, foreign bodies, water and moisture. Robust materials and construction, together with the specified operating temperature range, support use in a range of weather conditions.

The camera can be connected to monitors, navigation receivers and control units with a CVBS RCA video input.

Technical specifications

• Compact vehicle-specific rear-view camera
• CMOS sensor element with high color fidelity
• Guide lines in the camera image
• Separable three-part system cable, 5.0 m long, with waterproof system connectors for easier cable routing
• Integrated lighting element to OE specification
• IP69K-certified protection class
• Camera system: 1/4 in / 6.4 mm CMOS sensor
• Lens focal length: f 1.85 mm
• TV system: NTSC/60 fps
• Viewing angle: 160° (D) x 110° (H) x 80° (V)
• Native sensor resolution: 644 (H) x 484 (V) pixels
• Output signal resolution: > 500 TV lines
• Signal-to-noise ratio: > 50 dB
• Light sensitivity: 0.5 Lux
• Video output: 1.0 Vp-p, 75 Ohm CVBS
• White balance, exposure compensation, brightness adjustment,
• Synchronization: automatic
• Power supply: DC 12 V
• Power consumption: 40 mA – 90 mA (DC12V)/< 1080 mW
• Operating temperature: -20° C to +75° C, RH 95% MAX.
• Dimensions: model-specific