Sleeping area extension & access aid for the pop-top roof | roof bed in the Mercedes-Benz Marco Polo, Horizon, Activity W447 & Viano Marco Polo W639
Easy to get on and off the roof bed, significantly more sleeping space and storage options. Lead-through for heating hose or other objects.
Item no. 36468
The sleeping area extension for the Mercedes-Benz Marco Polo / Activity / Horizon W447 & Viano Marco Polo W639 provides significantly more sleeping space in the upper bed in the pop-top roof. A customised insert in the access hatch enables the positioning of several cushions and accessories. The otherwise open space can thus be fully utilised and the space gained can now be used as a bed or storage area.
The easy-to-handle mechanism allows the sleeping board to be inserted precisely into the access opening in front of the upper sleeping area. Whether as an additional lying surface or storage area. The storage space and the resulting protective device are an advantage. In addition, pillows, duvets or other objects can no longer fall down or slip out of place. The upper sleeping area is discreetly closed and covered.
The ultra-light construction made of robust honeycomb material is highly stable and can support the weight of 2 people. Ultralight, small and easy to fold, the sleeping board can be stored anywhere. We recommend transporting the sleeping board spread out lengthways on the roof bed. However, no more than the Project Camper cab insulation and the sleeping board should be transported on the roof bed.
We have adapted the sleeping board from the manufacturer to our heating hose concept. This provides a passage for our "Click & Heat" auxiliary heating extension into the pop-up roof. By using the heating hose, the air is not blown out directly next to the head. This means less air noise from the heating hose.
Optimised sleeping quality by covering the access opening, eliminating the incidence of light from the lower part of the vehicle and reducing the heating noise from the auxiliary heating fan under the driver's seat.
Instructions for sticking the holder:
Clean the area around the USB socket with the cloth supplied. Glue the holder in place, lower the roof and only use the sleeping board after approx. 24 hours, by which time the adhesive will have set.
Advantages of the 1sternehotel version sleeping area extension
- Easier access to the pop-up roof, especially if one person is already lying on top
- Extension of the sleeping area in the roof bed
- optimises sleeping quality in the camper at the same time
- Secure storage area in the pop-top roof for drinks, mobile phone, etc.
- no plastic lids or rings in the board, so no unsightly marks on the board
- no more pillows falling off
- Can be used with our Click & Heat heating hose in both vehicle variants
- our heated hose system works without a fan, so no fan noise and no power consumption or power connection required
- more storage space, which can also be used during the day when the bed is suspended at the top
- No wind noise from the heating hose
- less noise from the parking heater fan under the driver's seat
- in combination with the pop-up roof insulation, complete darkness
- More comfort during the day and at night
Made in Germany with ❤️
We offer the sleeping area extension in three variants
Variant 1 Loop space extension for Mercedes-Benz Marco Polo / Activity / Horizon W447 & Viano Marco Polo W639
Variant 2 Loop space extension for Mercedes-Benz Marco Polo / Activity / Horizon with heating hose for the current model
Variant 3 Loop space extension for Mercedes-Benz Viano Marco Polo with heating hose for the previous model
Scope of delivery
1x sleeping area extension | sleeping board | climbing aid for the Mercedes-Benz Marco Polo
1x stick-on holder for the sleep board around the USB socket, serves to magnetically lock the board in place
Depending on the selected article variant, the heating hose for the pop-up roof in the Mercedes-Benz Marco Polo / Horizon / Actiivity W447 or Viano Marco Polo W447
Installation time approx. 5 minutes
Tools required: NONE
Technical data board
Material - Board
Core = Honeycomb (hollow honeycomb profile)
Cover = needle felt
Material - support strip
Support strip = Aluminium
Cover = needle felt
Size
Laid out = 1,230 x 660 x 13 mm
Folded = 660 x 310 x 56 mm
Manufacturer board
50° North
Manufacturer heated hose
1sternehotel
Technical characteristic | Value |
---|---|
Manufacturer | 50° Nord |
Model | MB-MP-Bettverlängerung-Sets |
Content | 1 piece |
Condition | New |
Weight | 3500 g |